12
3.3
Features and Components
Features The PVS 100i is distinguished by the following features:
•
Real-time phase indication with GSM/GPS connection or with available low
voltage connection.
•
Can temporary operate independently of GPS reception thanks to internal
synchronization.
•
High voltage sensor for up to 120 kV with bidirectional wireless transmission to
the PVS 100i and direct visual/audible phase indication.
•
Measurement results logged in CSV format.
•
Correction of switching groups between base station and mobile unit by zeroing.
As a result, the phase shifts caused by these switching groups are automatically
taken into account in the measurement result.
Scope of delivery The scope of delivery may vary depending on the number of ordered devices. A
standard set consisting of two devices
(base station and mobile unit) generally
includes the following components:
•
Two basic devices in a Pelicase, each including
o
GPS antenna, plugged in
o
900/1800 MHz GSM antenna, screwed on
o
868/915 MHz rod antenna, screwed on
o
PDA stylus
o
External GSM antenna (incl. 5 m cable and tripod)
•
High voltage sensor HVS 120/36i incl. tip sensor head
•
Hot stick (110 kV, 2038 mm) (not included with the US version)
•
HVS US adapter (only included with US version)
•
HR-LRM-Adapter
•
2 x measuring cables, 1.5 m, black (MK41-B)
•
2 x measuring cables, 1.5 m, red (MK42-B)
•
2 x crocodile clips, fused, black
•
2 x crocodile clips, fused, red
•
Earth lead, green/yellow
•
2 x power cord, 2.0 m (NKG1)
•
Charger for HVS 120/36i
•
Bag/Trolley for accessories
•
USB flash drive
•
User Guide
Summary of Contents for PVS 100i
Page 1: ...Issue 4 12 2016 EN Article number 84534 USER GUIDE PVS 100i Phase Verification System...
Page 5: ...5...
Page 46: ......
