Megger PVS 100i, User Manual

Page: 24 / 47

24
Parameter Description
Expert mode
The export mode only needs to be enabled if new measurement
profiles are to be created (see section 8).
It can be kept disabled during day-to-day use.
Store
measurement
Only if this function is enabled, a button to save the measurement
data is available after the measurement. Otherwise, the data cannot
be saved at all.
Timezone
Using the and buttons you can set the time zone that the
device will be operated in. The number refers to Universal Time
Coordinated (UTC). Thus, for example 1.00 means UTC+1 and
therefore Central European Time (CET).
Profile change
Enables / disables the ability to change the measurement profile
during an ongoing measurement. If this feature is enabled, a
reconnect is not needed when changing the profile.
HV phase
buzzer
Defines whether there is an audible signal to represent the
identified phase on the sensor during a measurement.
The number of successive beeps denotes the number of the phase.
Display range Two options for the display format are available: -180…+180 and
0…360 .
► ◄