Megger PVS 100i, User Manual

Page: 32 / 47

32
Adaptor for hot sticks
with universal spline
head
In order to be able to attach the HV sensor to a hot stick with universal spline head
typical on the US market, first the HVS US adapter supplied with the US version must
be attached to the hot stick.
Using the HV sensor The head of the sensor must be guided up to the line until contact is made. As soon as
the sensor detects a voltage, the phasing is indicated by LEDs on the sensor and,
provided this function has been activated in the device settings (see section 7.1), also
indicated by an audible signal.
The number of successive flashes or audible signals
represents the number of the phase .
At the same time, the readings are transmitted by wireless to the mobile unit, which
displays them and logs them accurately to the second for later evaluation.
To extend the battery life, it is recommended to remove the sensor from the hot stick
as soon as possible after concluding the measurement. It then automatically
switches off.
LEDs