Megger PVS 100i, User Manual

Page: 25 / 47

25
Parameter Description
Keypad tones Switching the keypad tones on or off.
Phase ID
Using this dialogue, each phase can be assigned a name, a
specific phase angle and a maximum tolerance range.
For example, with the setting
L3 | 120° | ±20° , each phase with an
shift between 100° and 140° is identified as L3 and saved under
this name in the log file.
The phase shift must be entered in
-180…+180 format (see display
range parameter).
Angle positive
Direction of rotation of the phase angle. With this setting you define
whether the angle increases clockwise or counterclockwise. This
has the following effects on the displayed measuring results:
clockwise counterclockwise
Language
Selection of the menu language.
Standby time
Time until a mobile unit which has been put into standby switches
off automatically.
The setting
0.0 h deactivates the automatic switching-off.
GPS data
Current GPS coordinates.
HV sensor
Firmware update of the HV sensor (see chapter 4).