5.8.4 Interpreting test results
1. As each test in performed the result will simply be indicated
by either a green tick (test PASS), orange question mark (test
with a QUESTIONABLE RESULT) or a red cross (test FAIL)
2. As the tests proceed the result indications will appear. When
performing a RCD / GFCI test the user will be prompted to
reset the device following a trip test.
3. Should test fail, this will be indicated as follows and the test
sequence will stop
4. If any of the test results are questionable this will be
indicated and the test sequence will continue
5. If the testing sequence has passed all of the test results will
be ticked as follows
In the Autotest function none of the measurements are shown. Should a test result be indicated as
questionable or fail, the user can repeat that test in the normal test screen to review the full test results.
However a qualified electrician should always be consulted in this event.
35
Tests
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
