EN
119
Limbing a felled tree
1
First check which way the branch is bent
2
Then make a shallow cut into the compressed side to prevent the branch from whipping
back (Figure 7)
3
Cut through the branch from the tensed side
WARNING
Be alert to the cut branch whipping back
Pruning
Cut from the bottom up, and finish from the top down (Figure 8)
MAINTENANCE
WARNING
• Only use spare parts specified in this manual
• Using other spare parts can cause serious injury
• Follow the instructions for care and maintenance Improper maintenance may result in serious
damage to the machine
• Before cleaning, inspecting or repairing your unit, make sure that engine has stopped and is cool
• Disconnect the spark plug to prevent accidental starting
AFTER EACH USE
Air filter
• Dust on the surface of the filter’s casing can be removed by tapping it against a hard surface
• To clean dirt from the filter itself, first open the filter casing and then brush the filter clean
You can also blow the filter clean (from the inside) with compressed air
• To assemble the casing’s halves, press the rim until it clicks
Step 1
Step 2
8
