EN
111
Recommended mixing ratio
40 parts petrol: 1 part oil (JASO FC or ISO EGC grade for air-cooled, two-stroke engines)
25% (1:40)
Petrol, litres
Two-stroke oil, millilitres
1
25
5
125
10
250
20
500
Mixing fuel
1
Measure out the quantities of petrol and oil to be mixed
2
Put some of the petrol into a clean, approved fuel container
3
Pour in all of the oil and agitate well
4
Pour in the rest of the petrol and agitate again for at least one minute
5
Clearly mark the petrol can to avoid mixing it up with other containers
Refilling
1
Remove the fuel cap and oil cap Place the caps in a dust-free location
2
Pour the fuel mixture into the fuel tank and fill chain oil up to 80% of full capacity
3
Replace the caps securely and wipe up any spillage
CHAIN OIL
Always use oil specifically intended for chainsaws
NOTE:
Do not use waste or regenerated oil as it can damage the oil pump
