Meec tools 010576, Operating Instructions Manual

Page: 41 / 100

41
2022_001
1 Introduction
1.1 Product description
This product is a chainsaw model with an electric motor.
1.2 Intended use
This product is intended for sawing in wood.
1.3 Symbols
WARNING!
Read the operating instructions carefully
and make sure that you understand the
instructions before you use the product.
Save the instructions for future reference.
This product complies with applicable EU
directives and regulations.
Table of contents
1 Introduction 41
1.1 Product description .............................................................41
1.2 Intended use ..........................................................................41
1.3 Symbols ...................................................................................41
1.4 Product overview ...............................................................42
2 Safety 42
2.1 Safety definitions ................................................................42
2.2 General safety instructions ..........................................42
2.3 Work area safety ................................................................43
2.4 Electrical safety ..................................................................43
2.5 Personal safety ...................................................................43
2.6 Power tool use and care ................................................43
2.7 Service ....................................................................................44
2.8 Causes of kickback and ways to prevent it .........44
2.9 Safety instructions for operation ...............................44
2.10 Personal protective equipment ................................45
2.11 Safety devices ....................................................................45
2.11.1 Kickback guard/Chain brake ...................................45
2.11.2 Hand guard ......................................................................45
2.11.3 Strain reliever ..................................................................45
2.12 Safety instructions for maintenance ......................45
2.13 Vibration safety .................................................................46
2.14 Remaining risks ................................................................46
3 Assembly 46
3.1 To assemble the bar and the chain ...........................46
4 Operation 47
4.1 To do before you operate the product ..................... 47
4.2 To start the product ......................................................... 47
4.3 To stop the product .......................................................... 47
4.4 To use the sawing techniques .................................... 47
4.4.1 To use the pull stroke .................................................... 47
4.4.2 To use the push stroke ................................................ 47
4.5 To cut a trunk on the ground ....................................... 47
4.6 To cut a trunk that has support on one end ........ 47
4.7 To cut a trunk that has support on two ends ......48
4.8 To use the limbing technique ......................................48
4.9 To use the tree felling technique ...............................48
4.9.1 To do before felling a tree ...........................................48
4.9.2 To fell a tree ......................................................................48
5 Maintenance 48
5.1 To fill with saw chain oil ..................................................48
5.1.1 Saw chain oil ......................................................................48
5.2 To adjust the tension of the saw chain ...................49
5.3 To lubricate the bar tip sprocket ................................49
5.4 To do a check of the chain brake ..............................49
5.5 To do a check of the power trigger and trigger
lockout ...............................................................................................49
5.6 To do a check of the saw chain lubrication ..........49
5.7 To clean the product ........................................................49
5.7.1 To clean the oil channel in the guide bar ............49
5.8 To sharpen the saw chain .............................................50
5.8.1 To sharpen the cutters .................................................50
6 Transport 50
7 Storage 50
8 Disposal 50
8.1 To discard the product .....................................................50
9 Technical data
50
10 Troubleshooting 51