51
2022_001
10 Troubleshooting
Problem
Cause
Action
The chainsaw does not start.
The trigger lockout on the power trigger
has not been pushed in.
Push the trigger lockout on the product.
The chain brake is applied.
Reset the kickback guard.
The fuse has tripped.
Replace the fuse.
The residual current device has tripped. Do a check of and reset the residual
current device.
The power cord is not plugged in
correctly.
Inspect the power cord and power
point.
The chain does not stop within
2 seconds after the power trigger has
been released.
The chain tension is too low.
Do a check of and increase the chain
tension.
The chain and/or guide bar becomes
hot and produces smoke.
The oil tank is empty.
Fill with oil.
The oil hole in the guide bar is blocked. Clean the oil hole and chain slot.
The chain tension is too high.
Do a check of and decrease the chain
tension.
The sprocket on the bar needs
lubricating.
Lubricate the sprocket on the ba
The saw does not saw well.
The chain is fitted backwards.
Check the chain and fit in the correct
direction of rotation.
The chain is worn or damaged.
File or replace the chain.
The chain oil is not being consumed.
There are particles in the oil tank.
Empty the oil tank and fill with new oil.
The ventilation hole in the oil filler cap
is blocked.
Clean the ventilation hole.
The oil outlet is blocked.
Clean the oil outlet.
Summary of Contents for 010576
