5
General Safety
These usage and safety guidelines are
IMPORTANT!
Please follow them carefully.
1. It is recommended that the following guidelines be used whenever the system is
being stored or transported to another location:
- Temperature limitations: 40°F ~ 140°F (5°C ~ 60°C)
- Relative humidity: 30% ~ 75%
2. Carefully unpack the contents of the pump package.
3. Always connect the master control unit to a proper power source.
4. Check the power cord and plug for abrasions and excessive wear.
5. Plug in the unit and verify air flow from the hose connection port.
6. All MDS**INT and MDS6**SQ sleeve materials meet Class 1
Normal Flammability as defined in CPSC 16 CFR Part 1610.
Control Panel Features
Alarm Light
Blue LED Display Window
Battery Indicator
Time in Hours
Foot Mode
Pressure Settings
for Foot at
120mmHg
Time Reset Button
Power Button
Power Light
Single Sleeve Mode
Calf/Thigh Mode
Operating Instructions
The Hemo-Force was designed to be easily set up. The following steps should be
followed. Please read this instruction manual in its entirety before setting up.
1. Once the pump and sleeves have been removed from their packaging,
plug the pump into an electrical outlet.
DO NOT TURN ON YET.
2. Position the pump on any flat surface or suspend the pump at the foot of the
bed using the hooks. Do not hook on a slanted or curved surface.
3. Measure patient’s calf/foot/thigh circumference at the widest point to
ensure proper fit.
Summary of Contents for Hemo-Force MDS600INT
Page 1: ...1...
