10
Cleaning
The pump:
The casing of the pump is manufactured from ABS plastic which is a
combination of different resins that is hard and durable through a broad range of
temperatures. If soiled, it can be wiped down with a sodium hypochlorite solution
to dilution of 1000ppm or with any EPA approved, hospital grade cleaner.
The control unit (face)
should also be cleaned weekly using a damp soft cloth
and mild detergent. (Switch off the electrical supply to the pump and disconnect
the power cord from the main supply before cleaning and inspection)
The Sleeve:
It is a single patient use sleeve. Do not wash or clean, discard
after use.
Caution
• Do not use phenol based cleaning solutions.
• Switch off the electrical supply to the pump and disconnect the
power cord from the main supply before cleaning and inspection.
Waste Disposal
This Product has been supplied from an environmentally aware manufacturer that
complies with the WEEE.
This product may contain substances that could be harmful to the environment if
disposed of in places (landfills) that are not appropriate given state, local and/or
federal regulations. Please be environmentally responsible and recycle this product
through your recycling facility at its end of life.
Summary of Contents for Hemo-Force MDS600INT
Page 1: ...1...