Page 28
D.
Embedded controls on side rails (optional).
Optionally, beds could include controls embedded into the side rails. Use them the same
as previously described:
Figure N. 7-
Controls on side rails
9)
CPR backrest release
Press the lateral red lever placed under the backrest
section to quick descend backrest. As it is manual, it can
be adjusted without power supply.
Actuate the lever in any of each side of the bed and
slightly press the backrest until it achieves horizontal
position.
Figure N. 8 -
CPR backrest
release lever
A wrong assembling of a component could be a risk in the user. If you
observe that this component is not correctly assembled, do not use it,
leave the bed without using and contact technical department.
Before CPR manoeuvre, place the side rails in their lowest position. Do
not place hand between side rails and backrest while holds the backrest
to avoid damages.
When making this positon, the user should hold the backrest through the
handle to avoid entrapments or harms
10)
Automatic auto regression of backrest
Keys:
1-2: Backrest adjustment
3-4: Leg section adjustment
5-6: Auto contour: backrest and legrest sections
adjust at the same time
7-8: Height adjustment
9: Cardiac chair position
10: Light: when pressed, the light under the bed is
on. This is optional. If the bed does not include night
light, this button won’t work
11: Exit position: bed achieves its lowest position,
backrest section is adjusted at 30º, and legrest
section achieves its horizontal position
12 – GO button (on)
