User manual
MAJESTIC II bed
Page 7
WARNING:
Medisa is not responsible of any harm, damage, injury or accident that may
occur due to misuse, carelessness or negligence.
Safety and product use instructions must be strictly followed
Medisa reserves the right to modify this manual due to product upgrades or
technical changes. The information provided in this manual may be slightly
different with respect to the basic design of the product.
a.
Delivery
The bed is delivered fully assembled, except for its optional accessories, and headboard
and footboard. In this case, these components should be assembled before use
according to chapter
Headboard and footboard.
On delivery note it must be stated that
the bed has been complete delivered. Any failure or damage must be reported to the
carrier and Medisa (see Contact) before accepting the order.
When the bed is moved during loading and unloading, the brakes shall be unblocked
(see chapter
Central braking system)
. Wheels have been designed for use in an indoor
space and for movement in smooth, clean and stable soils (tiled floors, linoleum,
gypsum, etc.) Wheels could be damaged if the bed is moved on steep, uneven or dirty
surfaces.
2)
Safety instructions.
Before using this bed the staff must be familiarized with this user manual and the
operations described therein all operations must be carried out as defined in it.
RF communication equipment can affect electro medical devices.
Avoid the use of non-original or not approved by the manufacturer accessories,
since they can affect the electromagnetic performance.
During maintenance or cleaning in the space between base and mattress,
adjustment controls must be blocked in nurse panel to avoid accidents due to
an accidental activation of the pedals and the following unexpected movements.
In the event of any defect which may jeopardize the patient or user safety or which may
damage the bed or the building contents, remove the bed and do not use it until the
defect is corrected.
Before using the bed, connect the battery (check that it is connected to the power
supply at the delivery); battery duration will depend on workload and functioning cycles.
In order to ensure the correct operation of the bed, it must be operated only by those
who have been properly trained or those having enough experience.
The person responsible must inform the patient lying on the bed of its positioning
features, including the correct use of handset.
Before using the bed, test every function and check that it is in perfect conditions of
use. Check chapter
Use conditions
This bed must only be used on clean, hard, flat surfaces.
Never exceed the maximum load capacity of the bed, even in brief periods.
When a patient is lying on the bed, the braking system must be locked (except for
transporting the bed); this will eliminate the risk of roll over and other possible
accidents when getting on and off the bed. If exceeding the maximum load capacity of
the bed is absolutely necessary, its sections must be adjusted to their lowest position.
The angle of the sections must be appropriate for the state of the patient.
