Page 38
C. Cleaning recommendations.
Table N. 12-
Cleaning recommendations
Cleaning
recommendations
Surface
Daily cleaning
We recommend you to clean every day all those parts of the bed
exposed to the effects of contamination, in particular, because
of bare-hand contact and frequent use. Use a cloth with an
appropriate cleaner or disinfectant to clean the sections of the
bed. After each recovery period, it is essential to clean and
disinfect the contaminated surfaces of
the bed.
Cleaning to change
the patient
The components of the bed laid down in paragraph 1 and in
addition:
- All bed covers,
- The top side of the metal transport system,
- The surface of the column system,
- The mattress on all sides,
- Metal components of the bed,
- The area around the IV pole and lifting,
- Shock Records,
-
- The wheels and levers Central braking system.
full cleaning and
disinfection
All bed components set out in paragraphs 1 and 2, plus:
- All internal components of the structure accessible.
- Bottom of the bed.
19)
Maintenance
All persons involved in maintenance or service must have at least read the safety notes
for the bed model in question and have been trained. The operator of the beds must
guarantee the requirements of the medical staff defined by the regulations governing
the installation, operation, use and maintenance of the devices
To ensure trouble-free operation of the beds, these instructions for use and installation
must always be accessible to service personnel.
a)
Safety notes
During maintenance and technical reviews, the following specifications must be strictly
observed:
o The electrical installation of the room must meet all the specified technical
requirements and the bed must be used correctly.
o The wheels must be placed in the braking position.
o The beds are not protected against explosions and maintenance must be
carried out in an environment free of flammable substances and materials.
