Medion MD 37148, User Manual

Page: 45 / 138

46
3.2. Transport
NOTICE!
Possible material damage!
Risk of damage to the appliance if transported incor-
rectly.

Ensure that no part of the refrigerant circuit is damaged when
transporting and installing the appliance.

Where possible, always transport the appliance upright. If tilt-
ed to an angle of more than 40° during transport, wait 4 hours
before connecting it to the mains and switching it on to ena-
ble the refrigerant circuit to settle after transport.

Do not store or transport the appliance on its side or back, as
this can cause oil from the compressor to enter and block the
refrigerant circuit.

Do not expose the appliance to rain or spray water.
3.3. Installation and electrical connection
3.3.1. Location
NOTICE!
Possible material damage!
Risk of damage to the appliance due to improper han-
dling.

Install the refrigerator in a dry and ventilated room. The room
should be approx. 4 m² to ensure that sufficient air volume is
available if the refrigeration system becomes damaged.

Take the space requirements into consideration when setting
up the appliance (see “7.2. Setting up the appliance” on page
57).

The appliance is suitable for climate classes SN/N/ST/T (see
the type plate). The cooling performance of the appliance is
guaranteed at ambient temperatures from 10 °C to 43 °C. If
temperatures deviate from this range, the appliance perfor-
mance may be reduced.