Medion MD 37148, User Manual

Page: 46 / 138

IT
EN
SI
HR
47

Never place the appliance with the front edge along the edge
of a table top or shelf, because there is a risk of the appliance
tipping forwards and falling if the door compartment is over-
loaded. Take care to ensure that there is adequate space in
front of the appliance so that when opening the door, the
door lies on the storage surface when the appliance is tipped.
Always load the cooling chamber first and then the door com-
partment.

Do not expose the appliance to extreme conditions. Avoid:
– high humidity or wet conditions
– extremely high or low temperatures
– direct sunlight
– naked flames.
WARNING!
Risk of fire!
Insufficient air circulation can lead to heat accumula-
tion.

Make sure that the ventilation openings in the housing,
around the appliance and in the installation niche are not
blocked.

The appliance is not designed to be an integrated appliance.

To ensure adequate ventilation, a minimum clearance of 10
cm to the top and sides and 5–7 cm to the back must be ob-
served.

Do not install near heat sources such as hobs, radiators, un-
derfloor heating etc. If installation near a heat source cannot
be avoided, use an appropriate insulation panel or maintain
the following minimum clearances to the heat source:
– from electric or gas ovens or similar: approx. 10 cm
– from oil or coal-fired ovens: approx. 30 cm
– If installed next to another refrigerating appliance, a mini-
mum distance of 10 cm from the side is required.