EN
45
Menu option
Setting
NETWORK CHANNEL
SCAN
Select between digital cable or DVB-T station groups. This searches for
related channels of the currently selected station. The information sent
in this respect depends on the selected channel and leads to different
results.
The existing channel list is replaced when the network search is
started.
ANALOGUE FINE
TUNE
Here you can fine-tune analogue channels.
SATELLITE SETTINGS
SATELLITE LIST
Display satellite list
Use the
buttons to select a satellite from the
list. Press the
OK
button to call up the
ADD, EDIT
and
DELETE
options.
ANTENNA
INSTALLATION
In this section, you can change the antenna set-
tings and search satellites for new channels. Select
a satellite and press the
OK
button. Then the
TRAN-
SPONDER LIST, SCAN FOR SERVICES/LOAD PRESET
LIST, SAVE AND EXIT
and
CONFIGURE LNB
options
appear for further editing.
SATELLITE CHAN-
NEL TABLE
This menu item allows you to export or import the
existing satellite station list. Connect a removable
storage medium (USB stick) to save the satellite sta-
tion list onto it or update the list from the storage
medium.
INSTALLATION SET-
TINGS
Here you can make additional installation settings.
STANDBY
SEARCH
If the function is set to
ON
, the TV will search for
available stations while it is in standby mode. When
the device finds new or not yet available stations, a
menu is displayed that you can use to accept or re-
ject the changes
DYNAMIC
CHANNEL UP-
DATE
If you select the
ENABLED
setting, the channel list is up-
dated automatically.
SIGNAL INFORMA-
TION
Displays further data about the received signal.
FIRST TIME INSTALLA-
TION
This function correlates with the initial installation steps that occur after
switching on for the first time.
Carrying out the initial installation again will reset all settings back
to the Factory defaults, including the PIN.
