EN
41
HEADPHONE
Set the headphone volume here. This can only be changed if
HEADPHONE/
LINEOUT
is set to
HEADPHONE
.
WARNING!
Risk of hearing damage!
To prevent possible damage to your hearing, avoid listening at
high volume over long periods of time.
Before pressing play, set the volume to the lowest setting.
Start playback and increase the volume to a comfortable
level.
SOUND MODE
Standard setting
STEREO
. If the current programme supports DUAL mode (e.g.
dual-language broadcasts), you can also choose here between
DUAL-I
and
DUAL-II
(original language and dubbed language).
AUDIO LINK
Here you can enable or disable the Bluetooth function of the device. With
Audio Link enabled, it is possible to pair the TV set wirelessly with Bluetooth
speakers (e.g. a soundbar). Select
AUDIO LINK
and press the
OK
button.
DEVICE
Select the
ENABLED
setting if you want to connect the
device to an external speaker via Bluetooth. Then press
the
OK
button to search for available Bluetooth con-
nections. All found connections are then displayed. Use
to select the desired device and press
OK
to pair
the speaker or speaker system with the TV set.
Due to the great variety of different Blue-
tooth devices, faultless functionality cannot
be guaranteed. Please also read the operat-
ing instructions of the device that you wish
to connect to the TV. The device to be con-
nected must be in search mode.
To disconnect the connection again, select the
DISABLED
setting.
AVL
This function compensates for the different volume levels between different
programmes. Set to
OFF
to return to the original volume settings. Set to
ON
to hear a constant volume.
HEADPHONE/LI-
NEOUT
Select the audio signal for the headphone connection. The
HEADPHONE
set-
ting enables volume regulation for the signal. The
LINEOUT
setting means
that the signal has a predefined volume that cannot be changed. If this set-
ting is selected, an external amplifier can be connected to the device.
DTS
TRUSURROUND
Activate/deactivate the surround sound effect.
DIGITAL OUT
Set the audio type for the digital output here.
PCM
Standard format for the output of a stereo format
COMPRESSED
For the output of a digital data stream, e.g. on an end
stage with Dolby Digital decoder
BASS GAIN
Here you can increase or reduce (on a scale of 6 to -6) the bass component (sub
woofer signal).
