Appendix
49
Appendix
Special CleanUp Function
The CleanUp function serves the targeted deletion of data, with-
out using a PC.
IMPORTANT
: Please use this function
very care-
fully
, because it is possible for data to be deleted
that will only need to be entered again manually af-
terwards.
The CleanUp function will be activated if the ‘
o
’ is pressed in the
Gopal lettering of the Main Menu briefly, immediately after the
start tone following a soft reset
.
The CleanUp function offers 6 options:
1. Remove Installation Only
Removes the software installed from the ‘
My Flash Disk’
memory [= part of the permanent memory in which the executa-
ble parts of the navigation software will be located following the
initial alignment (\My Flash Disk\Navigation)].
2. Remove MAP Only
Removes the digital maps from the ‘
My Flash Disk’
memory (\My
Flash Disk\MapRegions).
3. Remove Preload Only
Removes the data needed for the installation of the navigation
software from the permanent memory (\My Flash Disk\Install).
i
