English
52
II. Connecting with the PC
1.
Press the On/Off button to start your navigation system.
2.
Connect the USB cable (
optional
) to your navigation
system.
3.
Push the USB connector into a free USB port on your com-
puter.
4.
The hardware installation assistant recognizes now a new
appliance and installs a suitable driver which can take some
minutes. Repeat the connection search if it fails the first time.
5.
Follow the instructions on the screen. The program will now
set up a partnership between your PC and the device.
III. Working with Microsoft
®
ActiveSync
®
ActiveSync
®
will be started automatically if you connect your
navigation system to the PC. The program will check whether the
device is one with which a partnership has been entered. If this is
the case, the changes that have taken place on the PC and on the
navigation system since the last synchronisation will be compared
and adjusted to each other. You will be able to define exactly
which data will have priority during the synchronisation in the
settings of the ActiveSync
®
Program. Call up the Help of the Pro-
gram (with the F1 Button), in order to become familiar with the
effects of the respective settings. A restricted
Guest Access
, with
which you will be able to exchange data, for example, will become
active automatically if the navigation system has not been recog-
nised as a partner. If this is the case, although the process con-
cerns the registered partner device, separate your navigation sys-
tem from the PC and switch it off and on again. Now connect your
navigation system to the PC, to restart the recognition process.
Repeat the process and, restart your PC in addition, if your device
continues to be recognised as a guest.
Note
: Make sure that you always connect your navigation system
to your PC with the same USB connection, otherwise your PC will
allocate an additional ID and reinstall the device.
