English
24
Resetting the navigation system
(Soft Reset)
Choose this option if your navigation system is not responding or
working properly.
This option restarts the navigation system, without reinstallation
being necessary. A soft-reset is often used in order to reorganize
the memory. In doing so all programs that are running are inter-
rupted and the working memory is reinitialized.
Perform the soft-reset as follows:
Press the tip of the stylus into the soft-reset switch opening or
insert a pointy object (e.g. a paper clip, which has been bent
open) with slight pressure into the reset opening.
Switching the Device off Completely/
Hard Reset
Warning
: A hard reset
will delete all data
in the
temporary memory.
Your navigation system will normally be in the Standby Mode, if
you have switched it off by pressing the on/off button briefly. In
addition, the system can be switched off completely; the con-
sumption of energy can be kept as low as possible through this.
All the data in the temporary memory will be lost if the device is
switched off completely (hard reset).
Switch your navigation system off completely in this way:
•
Press the on/off button for
6 seconds
.
The device will be switched on again by pressing the
on/off
but-
ton
again for
approx.
3 seconds
.
The software will
not
have to be installed again, if your device
has already been furnished with the basic data of the navigation
software in the permanent memory in the factory.
!
