English
20
Note
: Brief pressure on the on/off button will be
enough to switch the device on or off, provided that
your navigation system is connected to an external
source of electricity or is running in battery operation
.
Press the on/off button for
6 seconds
, if it is in-
tended to switch off the device completely. It will be
switched on again by pressing the
on/off button
for
approx.
3 seconds
, as mentioned above.
No data will be lost during this because of the storage of
data in the internal memory. The starting process will
only last slightly longer
.
Note
: Your device will be delivered in a status in
which it will not switch off independently.
You can adjust the period of operation to suit your
needs using the
Settings
button on the main screen
of your device.
III. Installing the Navigation software
Your device has already been equipped with the basic data of the
navigation software at the factory and the final installation of the
navigation software will take place automatically from the internal
memory. Follow the onscreen instructions.
The memory card must always be inserted in the device while the
navigation system
is being used
. It will be necessary to carry
out a Soft Reset to restart the navigation system if the memory
card has been removed, only for a short time, while the system
was being used (see page 24).
Please also read the chapter
Navigation
starting on page 25.
i
i
