31
9.
Optical drive*
9.1. Load
disc
NOTICE!
Risk of damage!
The high speeds in the drive may break defective me-
dia and damage your device. Damage resulting from
defective media is not covered under the warranty and
fees will be charged for the repairs.
Do not use scratched, broken, dirty or poor quality
discs or special types of discs.
Do not stick a protective film or any other stickers on
the discs, because the adhesive can damage the sur-
face of the disc and corrupt data.
Inspect discs carefully before inserting them. If dam-
age or dirt is apparent, you may not use this disc.
9.1.1. In horizontal drive
Press the eject button on the optical drive to open the tray.
Insert the disc into the tray, label up, so that it lies flat.
Press carefully against the drawer until the resistance is overcome and the draw-
er automatically returns into the optical drive.
9.1.2. In vertical drives
In contrast to optical drives in some desktop PCs, this PC uses a vertically installed
drive similar to those in notebooks.
When inserting the disc, ensure that it is pressed precisely onto the holder and en-
gages.
Press the eject button on the optical drive to open the tray.
Carefully press the disc onto the holder in the centre of the tray until it audibly
engages. Take care to ensure that the labelled side is visible.
Check whether the disc can rotate freely and then carefully slide the tray back
out until it engages.
34140 EN ALDI UK Content 2006 3872 RC1.indb 31
34140 EN ALDI UK Content 2006 3872 RC1.indb 31
14.03.2019 15:32:15
14.03.2019 15:32:15
