22
5. First
use
The operating system and all hardware drivers are already pre-installed.
Once all connections have been established you can start up your PC:
5.1. Operating LED responses
Operating LED state
Meaning
LED permanently on
System in operation
LED is flashing
System in power saving mode
LED off
System is shut down
5.2. Starting up the PC
Switch on the monitor.
Press the On/Off switch once to switch on your PC.
The PC starts and runs through the various installation phases.
There should be no bootable disk (e.g. the recovery disc) in the optical
drive as this will prevent the operating system from being loaded from
the hard drive.
The loading process of the operating system takes a little longer during the initial
setup. Once all the necessary data has been entered, the operating system will be
set up. The operating system is fully loaded once the Windows® 8 desktop appears.
NOTICE!
Loss of data!
The initial installation may take a few minutes. Do not
switch off the PC during this process, this could have a
negative effect on the installation.
Do not unplug the PC from the mains or switch it off
during the initial installation.
Do not switch the PC off until after the installation
has been completed successfully and the startup
screen appears.
34140 EN ALDI UK Content 2006 3872 RC1.indb 22
34140 EN ALDI UK Content 2006 3872 RC1.indb 22
14.03.2019 15:32:14
14.03.2019 15:32:14
