Medion AKOYA E4214, User Manual

Page: 27 / 86

Preparation for Starting-Up
To operate your notebook safety and ensure a long service life, you should
read the “Operational safety” chapter at the beginning of this manual. All
operating software is already fully preinstalled on the notebook so there is no
need for you to install any more drivers and you can get started right away.
− Before starting, insert the battery by placing it into the compartment until
it clicks into place. Be sure to fasten the battery compartment to prevent
the battery falling out.
− Connect the supplied mains adapter to the notebook. Next, connect the
power cable to the adapter and then plug it into a mains socket.
− Always hold the display fi rmly by the middle when folding it back,
adjusting the position and closing it. Failure to do so may damage the
display. Never use force to open the display.
− Open up the display to the desired position using your thumb and
forefi nger. The display should not be folded back by more than 120°.
NOTICE!
− When first operating your notebook please ensure that the
battery is inserted and the mains adapter is connected. This is
required for Windows® 8 to correctly work out the Windows® 8
performance index.
− Switch the notebook on by pressing the on/off button
6
. The
notebook will now start and run through various steps.
NOTICE!
Data loss!
The initial installation may take a few minutes. Do not unplug
the notebook from the mains or switch it off during the initial
installation. This may adversely affect the installation. Do not switch
off the notebook until after the installation has been completed
successfully and the
startup screen appears.
AUS
AUS
1300 884 987
AFTER SALES SUPPORT
26
www.medion.com.au
Preparation for Starting-Up
99570 E4214 Aldi AUS Content MSN 4005 4640 RC1.indb 26 99570 E4214 Aldi AUS Content MSN 4005 4640 RC1.indb 26 23.04.2015 14:58:55 23.04.2015 14:58:55