Medias Mediatrix 1204, Reference Manual

Page: 43 / 390

LED Indicators Reference Manual (SIP Version)
Mediatrix 1204 17
Booting LED Pattern Description
While in the Booting state, the LEDs of the Mediatrix 1204 behave independently; the following table indicates
the behaviour for each LED.
NormalMode LED Pattern Description
While in the NormalMode state, the LEDs of the Mediatrix 1204 behave independently; the following table
indicates the behaviour for each LED.
DiagFailed Triggered at start-time when the hardware or
software diagnostic fails. This is a critical error and
the unit may require RMA. Off Off Off Blink
4 Hz
50%
a. See the corresponding LED pattern in “NormalMode LED Pattern Description” on page 17 .
Table 10: States and LED Patterns (Continued)
State Description
LEDs Pattern
Ready In Use LAN Power
Table 11: LED Patterns in Booting Mode
LED Pattern Meaning
Ready Steady Off Not Ready.
In Use Steady Off Cannot be in use.
LAN
(HW Ctrl)
Steady On Ethernet connection detected.
Steady Off Ethernet connection not detected or hardware control not activated.
Blinking (variable rate) Ethernet activity detected.
Power
Steady On Power is On.
Blinking 1 Hz 75% Waiting for a DHCP answer.
Table 12: LED Patterns in Operation Mode
LED Pattern Meaning
Ready
Steady On All lines are enabled (operational state).
Steady Off All lines are disabled (operational state).
Blink 0.25 Hz 75% At least one line is enabled and at least one line is disabled
(operational state).
In Use
Steady On At least one line is busy (usage state).
Steady Off All lines are not busy (usage state) or the unit is not connected to the
network.
LAN
(HW Ctrl)
Steady On Ethernet connection detected.
Steady Off Ethernet connection not detected.
Blinking (variable rate) Ethernet activity detected.
Power
Steady On Power is On.
Steady Off Power is Off.
Blinking 1 Hz 75% Waiting for a DHCP answer.