Medias Mediatrix 1204, Reference Manual

Page: 75 / 390

Configuration File Download Reference Manual (SIP Version)
Mediatrix 1204 49
3. If not already done, set the transport protocol and configuration file path as described in “Setting up
the Configuration File Download” on page 43 .
4. In the Automatic Update section of the Configuration File page, select Enable in the Configuration
File Periodic Update field.
Figure 23: Management – Automatic Update section
5. Set the waiting period between each configuration update in the Periodic Update Period field.
The time unit for the period is specified in the Periodic Update Time Unit field (see Step 6). Available
values are from 1 to 48.
6. Define the time base for automatic configuration updates in the Periodic Update Time Unit field.
You have the following choices:
7. If you have selected Days in Step 6, set the time of the day when to initiate a configuration update
in the Periodic Update Time of Day field.
The time of the day is based on the SNTP Timezone field of the Management - Network Settings
page (see “SNTP Settings” on page 38 for more details).
You must have a time server SNTP that is accessible and properly configured, or the automatic
configuration update feature may not work properly. It is assumed that you know how to configure
your SNTP server. If not, refer to your SNTP server’s documentation. You can also refer to
“SNTP
Settings” on page 38 for more details on how to configure the Mediatrix 1204 for a SNTP server.
The configuration files are downloaded at the first occurrence of this value and thereafter at the
period defined by the
Periodic Update Period field. Let’s say for instance the automatic unit
configuration update is set with the time of day at 14h00 and the update period at every 2 days.
• If the automatic update is enabled before 14h00, the first update will take place the
same day at 14h00, then the second update two days later at the same hour, and so
on.
• If the automatic update is enabled after 14h00, the first update will take place the day
after at 14h00, then the second download two days later at the same hour, and so on.
Available values are -1, and from 0 to 23.
Entering -1 means that the time of the day at which the Mediatrix 1204 first downloads the
configuration files is randomly selected.
8. Click Submit if you do not need to set other parameters.
Table 35: Time Unit Parameters
Parameter Description
Minutes Updates the unit’s configuration every x minutes. You can specify the x
value in the Periodic Update Period field (see Step 5).
Hours Updates the unit’s configuration every x hours. You can specify the x
value in the Periodic Update Period field (see Step 5).
Days Updates the unit’s configuration every x days. You can specify the x
value in the Periodic Update Period field (see Step 5).
You can also define the time of day when to perform the update in the
Periodic Update Time of Day field (see Step 7).
4
5
6
7