Medias Mediatrix 1204, Reference Manual

Page: 22 / 390

Preface - About this Manual Document Structure
xxii Mediatrix 1204
“Chapter 23 - Telephony Attributes” on page 255 Describes the telephony attributes available on the
Mediatrix 1204.
“Chapter 24 - Management Server
Configuration” on page 263 Describes how to configure the Mediatrix 1204 to
connect to a module or software that is used to
remotely set up Mediatrix units.
“Chapter 25 - Quality of Service (QoS)” on
page 265 Defines the QoS (Quality of Service) features
available on the Mediatrix 1204.
“Chapter 26 - Syslog Daemon” on page 269 Describes how to configure and use the Syslog
daemon.
“Chapter 27 - Statistics” on page 273 Defines the statistics the Mediatrix 1204 can collect.
“Chapter 28 - Maximum Transmission Unit
(MTU)” on page 277 Describes the MTU (Maximum Transmission Unit)
requirements of the Mediatrix 1204.
“Chapter 29 - Troubleshooting” on page 279 Examines some of the problems you may experience
when connecting the Mediatrix 1204 to the network
and provides possible solutions.
Appendices
“Appendix A - Standards Compliance and Safety
Information” on page 295 Lists the various standards compliance of the
Mediatrix 1204.
“Appendix B - Standard Hardware Information”
on page 301 Lists the technical hardware information of the
Mediatrix 1204.
“Appendix C - Cabling Considerations” on
page 307 Describes the pin-to-pin connections for cables used
with the Mediatrix 1204.
“Appendix D - Country-Specific Parameters” on
page 311 Lists the various parameters specific to a country such
as loss plan, tones and rings, etc.
Table 2: Mediatrix 1204 Reference Manual Chapter/Appendices (Continued)
Title Summary