Meco Pellematic PES 12-20, Installation Manual

Page: 81 / 102

Appendix
81
14
Appendix
14.1 Checklist for checking the heating system
The checklist is intended to help authorised specialists perform and document a comprehensive check on the heating
system.
Name and adress of the customer Heating device
Name: Type of boiler:
Street:
Rated power:
Place: Year of build:
Name and adress of the seller Manufacturer`s serial number:
Name: Type of heating controller:
Street: Type of accumulator:
Place: Solar device:
Damage to property
Use the checklist to check the heating system before
starting up for the first time.
CHECKLIST Yes Comment
Textile tank
Textile tank Are the tie members installed?
Are all stayers straightened vertical?
Delivery unit
Is the slot for the emercency gate valve closed with an adhesive
tape?
Filling coupling Are the filling couplings correctly installed?
Are the plugs at the filling couplings?
Are the safety labels placed? (Caution – Switch off the heating
systembefore entering)
Are the couplings correctly grounded?
Aeration
Exists the required aeration opening of 27 inch² for the storage
room?
Caution label
Is the label "Wood pellets storage room" placed on the door to
the storage room?
Vibration plate
Check the electrical connection of the vibration motor and the
capacitive sensor
If auger delivery system is installed
Drive unit Is the direction of rotation correct?
Is a demounting possible?
Spiral hose Is the pitch to the burner > 45°?
Sound insulation Is the rock wool insulation fix at the wall duct?
Pellet boiler
Adjusting power rating Is the power rating corrrectly adjusted?
Burner plate Is the screw fixing the burner plate, tightened?
PE 3671 USA 2.3 Installation Manual PES 36–56