page 21
The display will show SET and a default load limit at
which the output signal will trigger. To set the required
load limit use
UP
and
DOWN
keys to adjust the value
and the
ENTER
key to confirm the selection.
The display will show STATE:
HIGH Will set PLC signal high at AFG’s alarm.
LOW Will set PLC signal low at AFG’s alarm.
Select the desired function and press the
ENTER
key.
The display will revert back to PLC sub-menu 1 and PLC
ON will now be displayed.
Press
ESC
key to return to the main menu page 1.
Once the desired settings for the AFG have been
established, it is possible to password protect the menu
pages, so that no further changes may be made without
authorised access.
To access the PASSWORD function, press and hold
the
MENU
key until page 1 of the main-menu appears.
Using the
UP
and
DOWN
keys, move the arrow cursor
to PASSWORD, and press
ENTER
.
The display shows MENU PASSWORD:
OFF
Enables access to menu pages.
ON
Requires a password be entered to access the
menu pages.
Use the
UP
and
DOWN
keys to move the arrow cursor
against the desired selection and press
ENTER
, then
press the
ESC
key twice to return to the main display.
AT LIMITS sub-menu 2
AT ALARM sub-menu 1
PASSWORD
PASSWORD sub-menu 1
