page 11
All the features and advanced menu options of the AFG
are also applicable whilst using the ‘Smart’ range of
peripheral devices. (Except for the footswitch 2 option
which has the same pin requirement).
The AFG Advanced Menus are navigated using the red
text on the function keys.
Press and hold the
MENU
key for approximately 3
seconds to access page 1 of the main-menu, (see Fig.
6). Pressing the
MENU
key again takes you to pages 2
and 3 of the main menu in turn. To move between the
options listed on the 3 main-menu pages, press the
UP
and
DOWN
keys to move the cursor. Press the
ENTER
key to select sub-menus, activate features and enter
values. Within sub-menus the
UP
and
DOWN
keys will
also change numerical values. Press the
ESC
key to
return to the relevant main-menu page and
ESC
again to
return to the main display.
The AFG may be used to send a signal to control
the Mecmesin range of motorised test stands via a
dedicated cable.
To configure the signal output from the AFG, press
and hold the
MENU
key until page 1 of the main menu
appears. The cursor arrow will point to STAND. Press
the
ENTER
key.
Advanced Menu
Options
Navigating the menus
MAIN MENU PAGE 1
Stand
Contact your supplier for stand
interface cable
Fig. 6
Main menu page 1
