page 15
The display will now show the two limits - LIMIT 1 (lower
limit) and LIMIT 2 (upper limit) - plus the value they are
set to and whether they are in tension (TENS ’ N) or
compression (COMP ’ N). A diamond cursor indicates
which value is selected. Use the
UP
and
DOWN
keys to
change the value, press and hold to scroll values. When
the correct value is reached, press the
ENTER
key to set
LIMIT 1. Repeat procedure for LIMIT 2 (see Fig. 8).
Note:
The alarm limits are not active below 1% of the
capacity of the tester.
The display shows AUDIBLE, LED and BOTH with the
arrow cursor indicating which feature is selected. This
menu selects how the PASS/FAIL status of a value will
be indicated.
AUDIBLE Only the audible alarm will be activated when
the value is a pass/fail.
LED
The PASS LED will illuminate green to
indicate a pass status, the FAIL LED will
illuminate orange or red to indicate low or
high failures respectively.
BOTH
Both the LED and the audible alarm will be
activated.
Use the
UP
and
DOWN
keys to move the cursor and
press the
ENTER
key to select the desired feature.
ALARM sub-menu 3
(ALARM LIMITS)
ALARM sub-menu 4
(ALARM INDICATOR)
Fig. 8
