Meazura MEZ1000 User Manual Download

Page: 21 / 110

Setting the date, time and time zone

The Date & Time screen lets you set the date, time, time zone, and daylight savings time for your
device.

Setting the date:

Tap the Home icon to access the Applications Launcher menu, then tap the Prefs icon.

From the pick list in the upper right corner, tap Date & Time.

On the Date & Time screen, tap the Set Date box; then tap the arrows at the top of the Set Date
Screen to select the current year.

Tap the month; then tap the current date.

The screen closes and the date you selected is displayed.

Setting the time:

Tap the Home icon to access the Applications Launcher menu; then tap the Prefs icon.

From the pick list in the upper right corner, tap Date & Time.

On the Date & Time screen, tap the Set Time box then tap the Up or Down arrow to change the
hour.

Tap each minute number, and then tap an arrow to change the number.

If available, tap AM or PM.

Tap OK to set the new time and return to the Date & Time screen.

NOTE

To display time based on a 24-hour clock, change the time format. See
"

Formatting the date, time, and numbers

" later in this chapter.

Setting the time zone:

Tap the Home icon to access the Applications Launcher menu; then tap the Prefs icon.

From the pick list in the upper right corner, tap Date & Time.

On the preferences screen, tap the Set Time Zone box.

Use the up and down arrows to scroll to your country and time zone. The hardware scroll buttons
can be used to scroll the list a page at a time.

Make sure your time zone is highlighted, then tap OK.

Summary of Contents for MEZ1000















































































































Search results

Summary of Contents for MEZ1000

Reviews:

Related manuals for MEZ1000

Brands by name

Popular brands

Meazura MEZ1000, User Manual

Search results

Summary of Contents for MEZ1000

Reviews:

Related manuals for MEZ1000

Brands by name

Popular brands