PSE
.
8
.
4.
Operation Menu Structure
Enter Setup Mode
1.
If there is a need to: configuration parameters, set user parameters, calibrate the scale, set
current date or time, test some hardware, hold down the
SETUP
key for more than 3 seconds to
enter into setup mode
2.
After entering the setup mode, the main menu item
CONFIG
will be shown.
3.
In Setup mode, use key to select the main menu item, then press the
TARE/PRESET
key to enter the item; use key to select the submenu item,
to select a choice, to set a number, to confirm and save data, and/or to exit this mode.
Main menu
CONFIG Submenu:
CONFIG
SubMenu1
SubMenu2
Option
Remark
Setting
CFG.ON
CFG.OFF
Seal switch is on or off
ON
RESET
NO
Reset configure parameters to factory setting
NO
YES
REGULA
NONE
Select the standard that the scale will comply with:
USA,CANADA, EUROPE
usa
USA
CANADA
EUROPE
PRIM.N
100-
100000
The division number under primary unit, if
3000
PRIM.D
0.0001
The division value under primary unit; the division value
under second unit is automatically determined by
indicator according to the division value under primary
unit.
0.05
0.0002
0.0005
0.001
0.002
0.005
0.01
0.02
0.05
0.1
0.2
0.5
1
2
5
10
20
50
CONFIG
USER
CAL
MISC
TEST