Technical Manual
Motion Detector/Automatic Switch 55/63
Series .02
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
6
6
2.4 Functions
The functions of the motion detector are divided into the
area’s
“G
eneral settings
”
,
“L
ight channel 1
and 2
”
,
“
HVAC
channel”
,
“Detection channel (A
larm
)”
,
“L
ogic
”
,
“
LED
”
,
“S
cenes
”
, and
“B
rightness
”
. For
the SCN-BWM55/63T.x2, the areas
“T
emperature
”
and
“B
uttons
”
are also available:
General Settings
The general settings are used for the basic configuration of the unit. Basic settings for sensitivity and
basic settings for brightness can be made here as well as the fallback times can be configured.
Furthermore, a cyclically transmitted "Operation" telegram can be activated.
Light channel 1 and 2
Light channel 1 and 2 can be configured and activated/deactivated separately from each other. The
active sensors can be configured for each light channel. The operating modes fully automatic and
semi-automatic (manual switch-on) are available. Furthermore, different values can be sent for
Day/Night (depending on the Day/Night object). A switching object, a scene object, or an absolute
value (dimming absolute) can be sent as an output object. Each light channel can be switched with
priority via a forced guidance object or a block object.
HVAC channel
The heating, ventilation and air-conditioning channel is the interface between the motion detector
and other systems. In contrast to the light channels, the HVAC channel has adjustable observation
windows with which the presence in the room can be monitored. By using this channel, it is possible,
for example, to control the ventilation of a room according to demand or to switch other HVAC
functions on presence/absence.
Detection channel (Alarm)
This channel is used to detect movements during absence. For this purpose, the channel has a
separate sensitivity setting and its own enable/disable object with which monitoring can be started.
In this menu you can also activate the motion direction detection.
Logic
Up to 4 different logics can be activated. These can be set with the functions AND, OR, XOR. Each
logic block can be activated with up to two internal logic objects and up to four external logic objects.
Switching commands, scenes, values or 2-bit priority control objects can be sent as output objects.
LED
A white, a green and a red LED are available for display.
The green LED can be used to signal motions, or the LED can be switched depending on an external
object.
The white LED can be configured as a night light or as a motion indicator. Furthermore, the LED can
be switched via a separate object. The brightness of the LED can be set from 1 - 100%.
The red LED can optionally be used as a pure programming LED or switched via a separate object.
Scenes
Up to 8 scenes can be activated which can cause adjustable actions in the light channels 1/2.
