Technical Manual
Motion Detector/Automatic Switch 55/63
Series .02
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
29
29
4.3.7 Status information
Light channel
HVAC channel
The following parameter can be activated here:
Figure 16: Settings
–
Status information
The following settings are possible for this:
ETS-Text
Dynamic range
[Default value]
Comment
Status information
•
not active
•
send value 1 for automatic mode
•
send value 1 for lock/manual mode
Activation of a status object.
Table 17: Settings
–
Status information
A status object is available for each of the Light channels and the HVAC channel. This can be used to
visualise current information as to whether lock/manual mode or automatic mode is active or
inactive.
The following communication objects are available:
Number
Name/Object Function
Length
Usage
10
Light channel 1 - Status
–
Automatic mode
1 Bit
Sends the set status
10
Light channel 1 - Status
–
Lock/Manual mode 1 Bit
Sends the set status
70
HVAC - Status
–
Automatic mode
1 Bit
Sends the set status
70
HVAC - Status
–
Lock/Manual mode
1 Bit
Sends the set status
Table 18: Communication objects
–
Status information
