Technical Manual
Motion Detector/Automatic Switch 55/63
Series .02
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
26
26
4.3.5 External push button short/long
Light channel
HVAC channel
The following picture shows the settings for the external push-button inputs:
Figure 14: Settings
–
External push button short/long
The following table shows the possible settings:
ETS-Text
Dynamic range
[Default value]
Comment
External push button
short/long reacts to
•
ON and OFF
•
only ON
•
only OFF
•
toggle on telegram input
Selection of which telegrams are valid
for the external button
External push button short:
If Night light is active
•
switch to Day light
•
stay at Night light
Setting what should happen when
external button is shortly pressed
while Night light is active.
If output "Day" is
already ON
•
stay in automatic mode
•
switch to manual mode
Setting the operating mode when
output is already ON at "Day".
Visible with setting "switch to Day
light".
If output is already ON
•
stay in automatic mode
•
switch to manual mode
Setting the operating mode when the
output is already ON.
Visible with setting "stay at Night
light".
Table 14: Settings
–
External push button short/long
