MDT SCN-BWM55.02, Technical Manual

Page: 10 / 61

Technical Manual
Motion Detector/Automatic Switch 55/63
Series .02
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
10
10
133 Button left long Send value 1 Byte X X X
133 Button left long Send percent value 1 Byte X X X
133 Button left long Send scene 1 Byte X X X
134 Button left long Status for toggle 1 Bit X X X X
+5 Button right
Table 2: Communication objects – Buttons
Standard settings – Common objects, LED, Logic
No. Name Object Function Length C R W T U
90 Day/Night Day = 0 / Night = 1 1 Bit X X X X
90 Day/Night Day = 1 / Night = 0 1 Bit X X X X
91 LED green Switch 1 Bit X X
92 LED red Flashing 1 Bit X X
93 LED white Switch 1 Bit X X
94 Scene Input 1 Bit X X
95 Operating Output 1 Bit X X X
97 Brightness Measured value 2 Byte X X X
98 Brightness
Set switch-on threshold for light
channels
2 Byte X X X
101 Direction of movement 1 Switch on movement from right to
left 1 Bit X X X
102 Direction of movement 2 Switch on movement from left to
right 1 Bit X X X
110
-
113 Logic 1 Input C-F 1 Bit X X X X
114 Logic 1 Output 1 1 Bit/
2 Bit/
1 Byte X X X
+5 next logic
130 Temperature Measured value 2Bytes X X X
Table 3: Communication objects – Common objects, LED, Logic
The tables above show the default settings. The priority of the individual communication objects and
the flags can be adjusted by the user as required. The flags assign the communication objects their
respective tasks in the programming. "C" stands for communication, "R" for reading, "W" for writing,
"T" for transmitting and "U" for updating.