MDT SCN-BWM55.02, Technical Manual

Page: 42 / 61

Technical Manual
Motion Detector/Automatic Switch 55/63
Series .02
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
42
42
4.5.1.3 Basic function – Blinds/Shutter

Two-button function
The blinds/shutter function is used to control shutter actuators, which can be used for the
adjustment and control of blinds/shutters.
The following figure shows the available settings:
Figure 25: Settings – Two-button function: Blinds/Shutter
The following table shows the available settings:
ETS-Text
Dynamic range
[Default value]
Comment
Button assignment
(left/right)
▪
Up/Down
▪
Down/Up
Setting the button assignment
(left/right) for the move function.
Operation function
▪
long=move
short=stop/slats Open/Close
▪
short=move
long=stop/slats Open/Close
Setting the concept of how to
operate with long/short buttons.
Table 29: Settings – Two-button function: Blinds/Shutter
Two communication objects are displayed for the "blind/shutter" function: The object "Stop/slats
open/close" and the object "blinds up/down “.The moving object is used to move the b linds/shutters
up and down. The stop/step object is used to adjust the slats. In addition, this function stops the
up/down movement as far as the end position has not yet been reached.
In the case of the two-button function, the key assignment can be set.
The table below shows the relationships:
Table 30: Two-button function – Blind function
It is also possible to swap the action for the long and short button presses.
The following table shows the available communication objects:
Number
Name/Object Function Length Usage
131 Buttons left/right –
Blinds Up/Down
1 Bit Up/down command for the shutter
actuator.
132 Buttons left/right –
Slats adjustment / Stop
1 Bit Slats open/close; stop command
Table 31: Communication objects – Two-button function: Blinds/Shutter
Function Up/Down Function Down/Up
Input Button left Button right Button left Button right
Moving object Up Down Down Up
Stop/Step object Stop/slats open Stop/slats close Stop/slats close Stop/slats open