MDT SCN-BWM55.02, Technical Manual

Page: 57 / 61

Technical Manual
Motion Detector/Automatic Switch 55/63
Series .02
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
57
57
Forced guidance for
output value
“False/True”
•
00 - no priority, Off
•
01 - no priority, On
•
10 - priority, Off
•
11 - priority, On
Visible when “ forced guidance 2Bit” is
selected .
Setting the value to be sent
Sending condition
•
on input telegram
•
on output change
•
send only 0 on change
of output
•
send only 1 on change
of output
•
send only 0 on input
telegram
•
send only 1 on input
telegram
Setting the Sending Condition:
On input telegram: The output value is
sent with every input telegram,
regardless of whether the output value
has changed or not
On change of output: The output value is
only sent if the output has changed.
Send only 1 on change of output: The
output value is only sent if the output
changes and the logic have the
corresponding value (0/1).
Send only 0/1 on input telegram: Output
value is sent with each input telegram if
the logic has the corresponding value
(0/1)
Output
•
normal
•
inverted
Defines how the output object is sent.
Internal Input A/B
•
not active
•
normal
•
inverted
Activation of an internal object as logic
input
Object number 0-129
[0]
Selection of the internal object -
Attention : Only bit values are evaluated
correctly!
External Input C-F
•
not active
•
normal
•
inverted
Activation of an external object as logic
input
Preset logic input
after reset with
…
•
value 0
•
value 1
Setting of a pre-assignment of the logic
after a bus voltage recovery.
Available when "External input" is
is "normal" or "inverted".
Table 50: Settings – Logic
The following table shows the associated communication objects:
Number
Name/Object Function Length Usage
110 Logic 1 – Input C 1 Bit External input for the logic function
111 Logic 1 – Input D 1 Bit External input for the logic function
112 Logic 1 – Input E 1 Bit External input for the logic function
113 Logic 1 – Input F 1 Bit External input for the logic function
114 Logic 1 – Output 1 1 Bit/
2 Bit/
1 Byte Output of the logic function. DPT depending on
the output object parameter
Table 51: Communication objects – Logic