Technical Manual
Glass Push-button II Smart & Push-button Smart 86 [Series .02]
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1 • Germany
Phone: +49-2263-
880 • [email protected] • www.mdt.de
82
82
Presentation
Single-button function
Two-button function
Hue, Saturation and Value are each represented by a special symbol. The current status is evaluated
by the push-button and the current position is displayed with an arrow on the respective special
symbol.
The 3 special symbols are shown below:
ETS-Text
Symbol
Comment
Hue
Saturation
Colour of the symbol
can be switched
between red, green,
blue.
Value
Table 63: Special symbols
–
HSV colour control
4.4.13 Colour temperature (Tunable White)
Single-Button function
Two-Button function
With the “Tunable White” function the colour temperature can be controlled in compatible KNX
dimmers and its status can be displayed.
The following figure shows the available settings (here for the two-button function):
Figure 44: Settings
–
Colour temperature (Tunable White)
The table below shows all available settings:
ETS-Text
Dynamic range
[Default value]
Comment
Datapoint type for status
object
▪
bar for colour temperature,
status in “%”
▪
bar for colour temperature,
status in “K”
Setting the datapoint type for the
status.
Table 64: Settings
–
Colour temperature (Tunable White)
