Technical Manual
Glass Push-button II Smart & Push-button Smart 86 [Series .02]
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1 • Germany
Phone: +49-2263-
880 • [email protected] • www.mdt.de
26
26
Font size for
first/second/third
status line
▪
large
▪
small
Setting the font size in the display.
Third status line visible with setting
“Standby over full screen” and
Number of lines”
→
“3”
Indicated level in
Standby
(fo
r „
Day
“
and
„N
ig
ht“)
▪
Level 1
▪
Level 2
▪
Level 3
Setting of the level that is displayed
during Standby.
With setting "Standby in upper
keypad".
Number of levels depends on the
activated levels in the "Button /
Function Setting" menu.
Only visible if more than 1 level is
active!
Indicated level after
Standby
(for „Day“ and
„Night“)
▪
Level 1
▪
Level 2
▪
Level 3
Setting of the level that is displayed
after Standby.
With setting "Standby over full
screen".
Number of levels depends on the
activated levels in the "Button /
Function Setting" menu.
Only visible if more than 1 level is
active!
Standby display during
„Night“
▪
no Standby
▪
Behaviour like “Day”
▪
Standby in upper keypad
▪
Standby over full screen
▪
Display OFF / black
Setting the display behaviour of the
info display in Night mode.
With the setting "
Behaviour like
Day
", the settings from Day mode
are adopted and there are no
settings for Standby mode.
Action on button
activation when display
is OFF
▪
Standby is exited
▪
Standby is displayed
Setting the behaviour for button
activation when the display is OFF
(e.g. via presence object).
Action on button
activation when
Standby is active
▪
Function is not executed
▪
Function is executed
Setting whether the underlying
function should also be executed
with the first keystroke in Standby.
Lock Standby display
via object
▪
not active
▪
active
Activation of a lock object to lock
Standby.
Table 12: Settings
–
Info display: Representation in Standby
"
Standby permanently visible in the upper keypad
" is permanently displayed when
"4 functions/1-3 levels" is selected (in the "Button/Function Setting" menu).
If "6 functions/1-2 levels" is selected, the parameter is only shown when the "upper buttons" are set
to "not active" in all activated levels.
