mcmurdo 21-100-001A, User Manual, Page: 65 / 114

65
4.9.1 Vessel Data Setting
Inland related vessel data can be set in this submenu:

ERI Ship Type – ERI classification code.

Blue Cones - The number of blue cones or blue flag status for the cargo (1, 2 or 3 blue
cones, or blue flag).

Load Status - ‘Loaded’, ‘Unloaded’, ‘Unknown’

Quality of Speed, Course and heading information - will be shown as ‘high’ when the target
vessel is using an approved sensor to generate this data, or low if the data is derived from
internal GNSS only.
Figure 67
Inland Related Vessel Data
4.9.2 ETA Setting
This menu provides ETA (RFM21) related setting:

UN country and location code - the voyage destination should be entered using UN country
(2 characters) and location codes (3 characters) where possible.

Fairway Number, Terminal Code & Fairway Hectometre: each is limited to 5 characters
when available

ETA - Estimated time / date of arrival at destination using UTC format MMDDHHMM
(excluding year)

Number of Tugboats: The number of assisting tugboats (from 0 to 6 or unknown)

Air Draught: The air draught of the vessel to the nearest centimetre.
Figure 68
Inland ETA Setting
INLAND VESSEL SETTING
2013/01/17 22:43:39
Dangerous Targets :0
ERI Ship type
<8021-Motor tanker, liquid ca>
Blue cones
Load Status
Quality Of speed info.
Quality Of course info.
Quality Of heading info.
IL
<B-Flag>
<Loaded>
<HIGH>
<LOW>
<LOW>
INLAND ETA SETTING
2013/01/17 23:27:10
Dangerous Targets :0
Targets :0 IL
[NL]
[AMS]
[ABCDE]
[FGHIJK]
[LMNO]
[12/24 13:50]
[06]
[+10.99]
UN Country Code
UN Location Code
Fairway Number
Terminal Code
Fairway Hectometre
ETA
Num. Of TugBoats
Air Draught (m)