Install SIM Card For DataLogger
®
Vault™ (continued)
Å
After saving, power off the router by disconnecting the supply
voltage connector (See router overview).
Å
The compartment for the SIM card is located on the back of the
device. Directly beside to the compartment for the SIM card in the
opening in the housing, there is a small yellow button. To open the
drawer, press the yellow button with a sharp object, for example
a pencil. Place the SIM card in the tray so that the card audibly
locks in place and so that its gold-plated contacts remain visible.
Then push the tray with the SIM card completely back into the
housing.
Å
After installing the SIM card, go back to the
“Network and
Sharing Center”
and go to the
"Internet Protocol Version
4 (TCP/IPv4) Properties"
. In the general tab, click the radio
button for
"Obtain an IP address automatically"
and click
OK
.
Å
Shut off engine.
Å
Disconnect the computer from the router. Reinstall the router in the
PLC box and connect all router cables.
TX05021-05-03-16
Set Up Talon
3 - 18
PH05
49
5-0
4-1
5-1
6
PH05
48
9-0
4-1
5-1
6
