Transport Talon
7 - 2
Disconnect the 2 power cables and the 2 data cables.
Install the Data Jumper Connector to the vehicle.
Remove the extension ladders from the indexer assembly and store on the indexer
skid.
Remove the pins and loosen the locking nuts on the twist locks. Turn all 4 quarter
twist locks to the unlocked position.
Follow all applicable federal, state,
local, and industry specific regulations
including the lifting safety warnings
in the General Safety section of this
manual when lifting.
Connect the lifting sling to the indexer assembly with the
two long legs (
Blue
) of the sling connected to the two lift
points away from the catwalk and the short legs (
Yellow
)
connected near the catwalk
Connect the sling to an appropriately rated piece of
overhead lifting equipment.
Long Legs of
Lifting Sling
¡ADVERTENCIA!
CD0
12
80-0
4-1
5-1
6
CD0
12
78-0
4-1
5-1
6
CD0
12
77-0
4-1
5-1
6
