Starting the Machine
The vehicle will need to be moved close to the indexer assembly so the
indexer assembly can be taken out of storage configuration and installed
on the vehicle assembly.
The vehicle will not operate without the indexer attached. The data jumper
connector is required if the indexer is not attached.
Å
Attach the data jumper connector to the data cable (Jumper is
attached to the vehicle). This jumper will bypass the emergency stop
from the indexer assembly and allow the vehicle to drive.
Å
Ensure all emergency stops are not activated.
Å
Turn on the battery disconnect switch.
Å
Open the fuel shutoff valve.
Ensure personnel are clear of the machine before
starting. Failure to do so could result in serious injury or
death to personnel.
Å
Start the machine using the Engine Control Box.
The engine will start and the HMI display will boot up to the Talon Control
Application.
Set Up Talon
3 - 2
Engine Control Box
¡ADVERTENCIA!
CD0
12
92-0
4-1
5-1
6
CD0
12
93-0
4-1
5-1
6
CD0
1308-0
4-1
5-1
6
