Lifting and Installing the Indexer Assembly
Make sure the vehicle assembly is on level and stable ground with the heater fully raised, facer in the home position and the
indexer moved to the full right end of stroke.
Connect the lifting sling to the indexer assembly with the two long legs (
Blue
) of the sling connected to the two lift points away
from the catwalk and the other legs (
Yellow
) connected to the points close to the catwalk.
Connect the sling to an appropriately rated piece of overhead lifting equipment.
Follow all applicable federal, state, local, and industry specific regulations including the
lifting safety warnings in the General Safety section of this manual when lifting.
Set Up Talon
3 - 8
Long Legs of
Lifting Sling
(Blue)
¡ADVERTENCIA!
CD0
13
22-0
4-1
5-1
6
