CLI Commands
config
2
2-7
2XWSXW
The LAN configuration data is displayed as a table that includes the
following properties.
2XWSXW([DPSOH
The output from the config.ip.show command displays as follows.
IP Address: 10.0.0.0
Gateway Address: 0.0.0.0
Subnet Mask: 255.0.0.0
FRQILJSRUWEORFNHG
6\QWD[
blocked portNumber blockedState
3XUSRVH
This command sets the blocked state for a port.
3DUDPHWHUV
This command has two required parameters.
&RPPDQG([DPSOHV
Root> config port blocked 4 false
Root> config port blocked 4 0
IP Address
The IP address.
Gateway
Address
The gateway address.
Subnet Mask
The subnet mask.
portNumber
Specifies the port number. Valid values are:
0–15 for the Sphereon 3016 and 3216
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–63 for the Intrepid 6064
0–127 and 132–144 for the Intrepid 6140
blockedState
Specifies the blocked state for the port. Valid
values are true and false. Boolean 1 and 0 may be
substituted as values.
Summary of Contents for OPENconnectors
Page 8: ...McDATA OPENconnectors Command Line Interface USER MANUAL P N 620 000134 500 Tables viii...
Page 14: ...McDATA OPENconnectors Command Line Interface USER MANUAL P N 620 000134 500 Preface xiv...
Page 164: ...McDATA OPENconnectors Command Line Interface USER MANUAL P N 620 000134 500 Glossary g 14...
