McDATA OPENconnectors, Command Line Interface Manual

Page: 59 / 170

CLI Commands
config
2
2-27
config.security.userRights.operator
6\QWD[
operator “username” “password”
3XUSRVH
This command sets the name and password for operator-level access.
3DUDPHWHUV
This command has two parameters.
&RPPDQG([DPSOH
Root> config security userRights operator “Operator”
“newpassword”
username Specifies the new user name for operator-level
login. Default is Operator. This parameter is 1–15
characters. Valid characters include all
characters in the USASCII character set,
excluding control characters and spaces. Spaces
are not valid even though quotation marks are
used.
password Specifies the password for operator-level login.
Default is password. This parameter is 1–15
characters. Valid characters include all
characters in the USASCII character set,
excluding control characters and spaces. Spaces
are not valid even though quotation marks are
used.