2
CLI Commands
McDATA OPENconnectors Command Line Interface USER MANUAL
2-22
&RPPDQG([DPSOHV
Root> config security portBinding wwn 4
AA:99:23:23:08:14:88:C1
Root> config security portBinding wwn 4 attached
Root> config security portBinding wwn 4 remove
config.security.portBinding.show
6\QWD[
show portNumber
3XUSRVH
This command shows the port binding configuration for a single
port.
3DUDPHWHUV
This command has one parameter.
&RPPDQG([DPSOH
Root> config security portBinding show 4
2XWSXW
The port binding configuration date is displayed as a table that
includes the following properties.
2XWSXW([DPSOH
The output from the config.security.portBinding.show command
displays as follows.
Port Number: 4
WWN Binding: Active
Bound WWN: AA:99:23:23:08:14:88:C1
portNumber
Specifies the port number for which the port
binding configuration will be shown. Valid
values are:
0–15 for the Sphereon 3016 and 3216
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–63 for the Intrepid 6064
0–127 and 132–144 for the Intrepid 6140
Port Number
The port number.
WWN Binding
The state of port binding for the specified port,
either active or inactive.
Bound WWN
The WWN of the device that is bound to the
specified port. If this field is blank, no device
has been bound to the specified port.
Summary of Contents for OPENconnectors
Page 8: ...McDATA OPENconnectors Command Line Interface USER MANUAL P N 620 000134 500 Tables viii...
Page 14: ...McDATA OPENconnectors Command Line Interface USER MANUAL P N 620 000134 500 Preface xiv...
Page 164: ...McDATA OPENconnectors Command Line Interface USER MANUAL P N 620 000134 500 Glossary g 14...